Rigidity Tester For Medical Indwelling Needle
Product introduction:
The rigidity tester of medical indwelling needle is designed and
manufactured according to the relevant provisions in "manufacturing
stainless steel needle tubes for medical devices". It is specially
used to test the rigidity of medical indwelling needle (tube).
Yg2006-a medical indwelling needle rigidity tester is composed of
intelligent controller, force measuring mechanism, ranging
mechanism and printer. The intelligent controller is composed of
CPU, motherboard, LCD, keyboard, power supply and so on.
The screen is displayed in all Chinese windows, and the keyboard
controls the cursor for options, operation and setting. It can be
operated according to the prompts without training.
It adopts 5.7 inch (120 × 90) single color LCD touch screen and
Chinese menu display. Nominal specification, set load, loading
span, print setting, test, uplink, downlink, time, calibration. The
menu on LCD screen is controlled by keyboard to collect the maximum
yield strength of catheter and print test data on board.
Nominal specification: all medical indwelling needles (four kinds)
produced by Suzhou Linhua, BD Medical Equipment Co., Ltd. and
Shandong Weigao group.
Set load: 0.5 ~ 10N, accuracy: ± 0.01N;
Loading rate: when loading to the set value, the speed is 1 mm /
min;
Loading span: 20-60mm, accuracy: ± 0.1mm (4 specifications);
Deflection test: 0 ～ 0.8mm, accuracy: ± 0.1mm;
Printing mode: it can print 8 times, 13 times or 20 times test
data, average deflection value and deviation value.
Net weight: 20kg
Overall dimension: 400 × 290 × 240 (mm)
Technical parameters:
Environmental Science:
Working temperature: 5 ～ 40 ℃
Relative humidity: 45-80%
Power supply voltage: 220 V ± 22 V
Power grid frequency: 50 Hz ± 1 Hz
Equipment type: type I, type B
