Ip56x intelligent sand dust resistance test box
Sand dust test box is also known as: sand dust test box, sand dust
test equipment, sand dust test machine, sand dust test box, sand
dust test device, sand dust test box, sand dust test device, dust
test box, dust test equipment, dust test machine, dust test box,
dust test device, dust test box, dust test device Standby, dust
testing machine, dust test box, dust test device.
Product description
According to the national standards GB / T 10485-2007, GB
2423.37-2006 Test L: dust test La2, GB 4208-2008 housing protection
level (IP code), GB 7000.1-1996, GB 7001-1986 lamp housing
protection level, and a series of related housing protection level
standards, the design is reasonable, the operation is simple, easy
to maintain, and all indicators meet the national standards.
This SC series is used to test the sealing performance of the shell
of the product. It is mainly used for the test of ip5x and ip6x
specified in the shell protection level standard.
Main technical parameters
1. Model, studio size:
SC-500
800×800×800MM
SC-800
800×1000×1000MM
SC-010
1000×1000×1000MM
SC-015
1000×1500×1000MM
SC-020
1200×1800×1200MM
2. Nominal wire diameter of metal screen: 50 μ m, nominal spacing
between wires is 75 μ m;
3. Air flow speed: not more than 2m / S;
4. Sand dust concentration: 2-4kg / m3;
5. Test dust: dry talcum powder, Portland cement, fume, etc;
Introduction to structural design
Select high-quality materials, use advanced processing equipment to
process and shape, and spray the shell surface, beautiful and flat.
Harmonious color matching, arc design, smooth and natural lines.
The liner is made of high quality stainless steel plate. The indoor
sample rack and other accessories are made of stainless steel
plate, reasonable design and durable.
The equipment is equipped with air flow with dust vertical
circulation, and the test dust can be recycled; the equipment
itself has good sealing performance, and the indoor test condition
can be clearly observed during the test; the equipment is equipped
with a set of vacuum pumping system to meet the test needs; the
bottom of the equipment is equipped with a device for replacing
dust, and the base is installed with four movable casters, which is
convenient to move.
Circuit control system
1. With PLC control and LCD display, the fan, dust vibration and
total test time can be controlled respectively
2, The controller has the following functions of any setting
control
a. Time (stop, blow): continuous, periodic optional time setting
b. Vibration time: vibration and stop vibration time automatically
alternate: 99h99m99s can be set
c. Preset test time: the maximum test time is 9999 hours and 59
minutes
d. On: off - on - off
3. Heating system: the circulating air duct is equipped with heater
heating dust,
4. To avoid dust condensation, use pipe hoop type mica plate
heating ring,
5. Heat safety and stability;
6. Timing heating control;
7. The dust intake is designed so that the dust can be easily
replaced at any time;
8. The control system is equipped with Schneider executive
components;
9. Equipped with vacuum pump, vacuum pipeline system, vacuum
pressure indication and adjustable;
10. Flow control of vacuum pump: 60-600l / h; (or according to
customer requirements)
Protection system of sand dust test box
1. No fuse protection switch;
2. Earth leakage, fully sheathed terminals;
3. Overall equipment timing, automatic shutdown and other
protection.
Random data of sand dust test chamber
1. Certificate, warranty card, circuit diagram;
2. Instruction: operation method, precautions, basic parts for
shipment, maintenance and repair.
Operating conditions of sand dust test chamber
1. Ambient humidity: ≤ 85%
2. Power requirements: AC380 (± 10%) V / 50Hz three-phase five wire
system
3. Pre installed capacity: 3kw
