Apparatus to verify the fixation of pins in the body of the plug
FP-1
Product details:
This device conforms to the standard of IEC 60884-1 Fig30. It is
used for testing the firmness of the plug and the plug pin. The
plug is placed on a rigid steel plate provided with holes suitable
for the pins of the plug. The distance between the centres of the
holes shall be the same as the distances between the centres of the
circle circumscribed around the cross-sectional area of each pin in
the standard sheet of the plug.
Each hole shall have a diameter equal to that of the circle
circumscribed around the cross-sectional area of the pin plus (6 ±
0,5) mm.
The plug is positioned on the steel plate in such a way that the
centres of the circles circumscribing the pins coincide with the
centres of the holes.
A pull P equal to the maximum withdrawal force as given in table
16, is applied, without jerks, for 1 min on each pin in turn, in
the direction of the longitudinal axis of the pin.
The pull is applied within a heating cabinet at a temperature of
(70 ± 2) °C, 1 h after the plug has been placed in the heating
cabinet.
After the test, the plug is allowed to cool down to ambient
temperature and it shall be verified that no pin has been displaced
in the body of the plug by more than 1 mm.
Technical parameters:
Number of test station: 1
Weight: 50N*1, 20N*2, 30N*1, 4N*1
Standard Socked: BS socked*1, USA socked*1
Conforms to standard: IEC 60884-1 Fig30, VDE0620, BS1363
Services:
1. Do not worry, it will be best services.
2. Consult us immediately.
3. We will get back to you the first time.
4. It's my pleasure.
Primary products:
Laboratory Test Equipment
Appliance Test Equipment
Medical Device Testing Equipment
Waterproof Test Equipment
Dust Testing Equipment
Flammability Testing Equipment
Electric Testing Equipment
Impact Testing Machine
Cable Testing Machine
Vibration Test Equipment
Light Testing Equipment
Communication Test Equipment
Plug Socket Tester
Leak Test System
