IPX9 Waterproof Test Equipment HH0807
Standard:Clause 14.2.9 of EN60529:1992+A2:2013, ISO 20653-2006,
ISO30653-2006, clause 4.9.2of QC/T 417.1-200, clause 6.2.7 and
6.2.8 of TOYOTA ENGINEERING STANDARD TSC1000G. DIN40050-9 IP
degrees of protection provided by enclosures for the electrical
equipment in road vehicles for protecting the electrical equipment
inside the enclosure against the effects of the ingress of solid
foreign objects, including dust (protection against foreign
objects),protecting the electrical equipment inside the enclosure
against the effects of the ingress of water (protection against
water).
Application:It is used to inspect the IEC enclosures for the electrical
equipment (IP supplementary code test), and it is applicable for
waterproof testing of the electrical and auto parts under high
temperature and high pressure.
Test sample:With IPX9 degrees waterproof test products, such as automobile and
motorcycle parts, electrical and electronic industries.
Feature: The equipment is consists of heating water tank, high pressure
plunger pump, high pressure solenoid valve, fan nozzle, turntable
and so on. Firstly, heat the water in the water storage tank to
required temperature, secondly, mount the sample on the turntable,
adjust the position of the nozzle, thirdly, close the protective
door of the test equipment, set all test required parameters,
finally, start the test. The four nozzles spray for 30 seconds in
order during the test.
Parameters:
| Test Water Temperature | 80±5 ℃ |
| Nozzle specification | It is designed according to the standard figure |
| Nozzle number | 4(0°,30°,60°,90°) |
| Spray pressure | 8MPa-10MPa(adjustable) |
| Spray flow | 14l/min-16l/min (change according to pressure) |
| Spray distance | 100～150mm adjustable(The maximum side of the test product shall not
exceed 450mm) |
| Sample support platform | ￠400mm |
| Sample support platform rotate speed | 4-6r/min |
| Sample support platform bearing | ≤15kg |
| Sample support platform lift | 300mm～400mm (Manually) |
| Power supply for test sample | Provide interface for test product, 4 core wire power supply, the
maximum 30A |
Picture for reference:
Our Service
7X24-hour Telephone Consulting Service is available.
Reply and solution will be provided in 8 hours upon customer’s
service request.
After-sales Support is available on a 7X24-hour basis, leaving no
worries for customers.
Quality inspection from raw material to production, and delivery.
Professional quality control person, to avoid the unqualified
products flowing to customer.
Strict inspection to Raw material, production, and delivery.
Full series of equipment in quality laboratory.
Our Team
Responsibility is the assurance of quality, and quality is the life
of corporation. We are looking forward to long term cooperation
with customers, we will make best service and after sales service
for all of our customers. If you have any inquiry, please don’t
hesitate to contact us. We will reply you at the first time as we
can.
