Oscillating Tube Tester for IPX3 and IPX4 HH0802
Standard:IEC60529 degree of protection provided by enclosures (IP Code) of
the IPX3 and IPX4, IEC 60884-1, IEC 60335-1, IEC 60598-1.
Application:It is used for the testing of IPX3 and IPX4.
Test sample:The test apparatus with water proof functions, such as electronic
appliances, lamps, electrical cabinets, electrical components, car,
motorcycle, electrical products (such as automotive instrument, all
kinds of switches, micro motors, etc.)
Feature:There are two models: Open type and chamber type. Using PLC
control, motor drive oscillating tube to do the reciprocating
motion at a certain angle, at the same time control the water flow,
the turntable rotates at a certain speed, so that to make every
side of the sample testing uniformly.
Parameters:
| Item | Parameters |
| Input power | Single-phase AC220V,50Hz |
| Water supply | Water flow rate＞10L/min±5% clean water without inclusion. This device is equipped with clean water filtration unit |
| Control and operation | PLC intelligent control, 7 inch color touch screen operation |
| The size of the oscillating tube | R200 ,R400,R600,R800,R1000,R1200,R1400,R1600mm. Optional,stainless
steel |
| Needle hole | Φ0.4mm |
| Included angle of two holes | IPX3:120°； IPX4:180° |
| Pendulum angle | IPX3:120°(±60°)； IPX4:350°(±175°) |
| Raining speed | IPX3:4 s/time(2×120°)； IPX4:12 s/time(2×350°)； |
| Water flow | 1-10L/min adjustable |
| Testing time | 0.01S～99hours 59min,can be preset |
| Rotary plate | Diameter:Φ600mm；Rotate speed:1r/min,Can be paused at four aspects,
Load bearing≤50㎏electrical equipment |
| Pressure gauge | 0~0.25MPa |
| Site requirements | Dedicated IP waterproof test room,The ground should be flat with
illumination 10A waterproof leakage switch(or socket)used for equipment. With
good function of inflow and drainage. Ground installation |
| Area covered | It is set according to the selected oscillating tube |
Our Service
7X24-hour Telephone Consulting Service is available.
Reply and solution will be provided in 8 hours upon customer’s
service request.
After-sales Support is available on a 7X24-hour basis, leaving no
worries for customers.
Quality inspection from raw material to production, and delivery.
Professional quality control person, to avoid the unqualified
products flowing to customer.
Strict inspection to Raw material, production, and delivery.
Full series of equipment in quality laboratory.
Our Team
Responsibility is the assurance of quality, and quality is the life
of corporation. We are looking forward to long term cooperation
with customers, we will make best service and after sales service
for all of our customers. If you have any inquiry, please don’t
hesitate to contact us. We will reply you at the first time as we
can.
