Glow Wire Tester GW-1
Standard:IEC60695-2-10, IEC60695-2-13 and UL746A.
Application:This device simulates the thermal stress test of glowing component
or heat source like overload resistance or ignition source which is
caused in a short time. It is suitable for electric and electronic
products, household appliances and other material to do fire hazard
testing. It is also used in the No flame ignition source fire test
to test initiation temperature and flammability index of related
glowing filament.
Test sample:Electrical equipment and its components and parts, solid electrical
insulating materials and other solid combustible materials.
Parameters:
| ParametersModel | GW-1 | GW-2(Touch screen) |
| Working voltage | 220V/50Hz | 220V/50Hz |
| Control operation mode | Electrical control, button
operation | PLC control, 7 inch color touch screen operation, with infrared remote control |
| Glowing filament | Ф4mm ± 0.04mm (> 77 % Ni/20 ± 1 % Cr) special standard ring
shape,horizontal standing |
| Specimen pressure on glowing filament | 0.95N±0.1N |
| Maximum depth of heating | 7mm ± 0.5mm |
| Specimen movement speed | 10mm /s ～ 25mm /s |
| Temperature calibration | Calibration temperature:960°±10°C, the hot wire by electric heating |
| Thermocouple: RS imported 1mm armour nickel-chromium/nickel/ nickel
aluminum K-Thermocouple, temperature resistance 1100° |
| Silver foil: purity 99.8%, area :2m², thickness:0.06mm |
| Tray | A layer of silk paper (12~30g/m³) is covered on the 10mm thick pine
board, with a distance of 200±5mm below the test sample |
| Test chamber | >0.5 cube,sample distance from the inside of the box is greater
than 100mm, black yogon background,background illuminance ≤
20Lx,with exhaust fan |
| Testing time | 30s±1s |
| Test procedure | The test sample is driven by the car and automatic run, the car
will return automatically after glow-wire entered the test sample
of 7mm |
| Lighting | Equip with lighting in the test chamber, with control |
| Dimension | 1100*550*1200mm,140kg |
Feature: Test principle: the glowing filament whose material and shape is
required(Ni77/Cr20) is heated to the testing temperature of 550 ℃ ～
960 ℃ for 1 min by using the glow wire tester with large current.
Then using required pressure (0.95N) vertically burns the test
sample for 30s. By observing whether the test sample and bedding
object ignite or the burning time, the users can judge the ignition
danger of electric and electronic products. It is used for the
ignition test, ignition temperature (GWIT) test, flammability test
and flammability index (GWFI) test of solid insulating material and
other solid combustible material.
About Us
We have a clean and tidy, wide workshop and a production and
development team with rich experience, providing strong support for
your r&d and production needs! All of our products comply with
international quality standards and are greatly appreciated in a
variety of different markets throughout the world. If you are
interested in any of our products or would like to discuss a custom
order, please feel free to contact us. We are looking forward to
forming successful business relationships with new clients around
the world in the near future.
Continuous improvement, seeking higher quality level. Our highly
dedicated sales staff has never shied away from going that extra
mile to meet and exceed the customer’s expectations. We treat our
customers with the same loyalty and devotion, no matter the size of
their business or industry.
Our Service
7X24-hour Telephone Consulting Service is available.
Reply and solution will be provided in 8 hours upon customer’s
service request.
After-sales Support is available on a 7X24-hour basis, leaving no
worries for customers.
Quality inspection from raw material to production, and delivery.
Professional quality control person, to avoid the unqualified
products flowing to customer.
Strict inspection to Raw material, production, and delivery.
Full series of equipment in quality laboratory.
